Loading...
|
|
Clarion 2007 Safety Label Catalog
Safety Instructions
 |
| Part Number: |
7000-525SVP-60 |
| Size: |
60 - 9.20 x 2.70" Rect. |
Word Message: SUGGESTED
LOCKOUT
PROCEDURE 1. Announce lockout
to other personnel. 2. Turn power OFF at
main panel. 3. Lockout power in
OFF position. 4. Put key in pocket. 5. Clear machine of
all personnel. 6. Test lockout by
hitting RUN button. 7. Block, chain or
release stored
energy sources. 8. Clear machine of
personnel before
restarting machine. 9. Take key from
pocket. 10. Unlock the
lockout device. 11. Turn power on
at main panel. 12. Announce
machine is ON
to other personnel. |
|
 |
| Part Number: |
7000-526SVP-58 |
| Size: |
58 - 8.60 x 3.35" Rect. |
Word Message: 1. Only a trained person is to be permitted to operate this equipment. Training should include instruction
in operation under normal conditions and emergency situations. 2.Where safety is dependent upon stopping devices or starting devices
or both, they are to be kept free of obstructions that could endanger personnel. 3. The areas around loading and unloading points are to be kept clear of obstructions
that could endanger personnel. 4. Personnel working on or near this
equipment shall be instructed as to
the location and operation of pertinent stopping devices. 5. This equipment is to be used only for
the purpose for which it is constructed.
See operator's manual for the proper use of this equipment. 6. Under no circumstances are the
safety characteristics of this equipment to be altered. 7. Routine inspections and corrective/
preventative maintenance measures are to be conducted to ensure that all guards and safety features are
retained and function properly. 8. All personnel are to be alerted to the
potential hazards indicated by the safety labels on this equipment. 9. As a general rule this equipment is
not to be cleaned while in operation. Where proper cleaning requires the
equipment to be in motion and a hazard exists, personnel should be made aware of the associated hazard. |
|
 |
| Part Number: |
7000-527SVP-U3 |
| Size: |
U3 - 5.50 x 2.00" Rect. |
Word Message: SUGGESTED
LOCKOUT
PROCEDURE 1. Announce lockout
to other personnel. 2. Turn power OFF
at main panel. 3. Put key in pocket. 4. Lockout power in
OFF position. 5. Clear machine of
all personnel. 6. Test lockout by
turning machine
power switch to ON. 7. Clear machine of
personnel before
restarting machine. 8. Take key from pocket. 9. Unlock the
lockout device. 10. Turn power ON
at main panel. 11. Announce machine
is ON to other
personnel. |
|
 |
| Part Number: |
7002-528SVP-58 |
| Size: |
58 - 8.60 x 3.35" Rect. |
Word Message: 1. Read and understand the Operation
Manual and all safety labels before
operating this machine. 2. Only a trained person is to be
permitted to operate this machine.
Training should include instruction
in operation under normal conditions
and emergency situations. 3. This machine is to be serviced only
by trained and authorized personnel.
Follow lockout procedures before
servicing.
4. Never reach into the machine for any
reason unless the machine is at a
COMPLETE STOP. 5. Never leave the machine stopped in
such a manner that another worker can
start the machine while you are working
on or within the machine. 6. Never change or defeat the function of
electrical interlocks or other machine
"shutdown" switches. 7. Before starting this machine, check that:
- All persons are clear of the machine.
- No maintenance work is being performed
on the machine.
- All guards are in place.
- All parent rolls are well chucked in the
unwind stands.
- The machine is free of paper scraps,
wraps and jams.
8. There is a potential hazard of entanglement
in this machine caused by items such as
long hair, loose clothing, and jewelry.
Make sure your clothing and hair fit
closely to your body and that all jewelry,
rings and watches are removed. |
|
 |
| Part Number: |
7002-DRSVP-58 |
| Size: |
58 - 8.60 x 3.35" Rect. |
| Word Message: 1. Read and understand the Operation Manual and all safety labels before operating this machine. 2. Only a trained person is to be permitted to operate this machine. Training should include instruction in operation under normal conditions and emergency situations. 3. This machine is to be serviced only by trained and authorized personnel. Follow lockout procedures before servicing. 4. Never reach into the machine for any reason unless the machine is at a COMPLETE STOP. 5. Never leave the machine stopped in such a manner that another worker can start the machine while you are working on or within the machine. 6. Never change or defeat the function of electrical interlocks or other machine "shutdown" switches. 7. Before starting this machine, check that: - All persons are clear of the machine. - No maintenance work is being performed on the machine. - All guards are in place. 8. Routine inspections and corrective/ preventative maintenance measures are to be conducted to ensure that all guards and safety features are retained and function properly. |
|
|
|
|
|
|
